| A | B | C | |
|---|---|---|---|
1 | Test Number | Test Name | Description |
2 | 1 | Baseline | Speeds 30,40,50;60,70 mph |
3 | |||
4 | 2 | Yaw 10 deg | Speeds 50 mph |
5 | 3 | Yaw 15 deg | Speeds 50 mph |
6 | 4 | Yaw 20 deg | Speeds 50 mph |
7 | |||
8 | Insert spacers marked for 0.5 deg pitch | ||
9 | 5 | Pitch 0.5 deg | Speeds 30,40,50 mph |
10 | Remove previous spacers, Insert spacers marked for 1.0 deg pitch | ||
11 | 6 | Pitch 1 deg | Speeds 30,40,50 mph |
12 | Remove previous spacers, Insert spacers marked for 1.5 deg pitch | ||
13 | 7 | Pitch 1.5 deg | Speeds 30,40,50 mph |
14 | |||
15 | Remove previous spacers, Insert spacers marked for lowest roll angle | ||
16 | 8 | Roll angle 1 | Speeds 30,40,50 mph |
17 | Remove previous spacers, Insert spacers marked for next roll angle | ||
18 | 9 | Roll angle 2 | Speeds 30,40,50 mph |
19 | Remove previous spacers, Insert spacers marked for next roll angle | ||
20 | 10 | Roll angle 3 | Speeds 30,40,50 mph |
21 | |||
22 | Remove spacers, change front wing angle to -2 deg | ||
23 | 11 | FW AOA -2 deg | Speeds 30,40,50 mph |
24 | Change front wing angle to 2 deg | ||
25 | 13 | FW AOA 2 deg | Speeds 30,40,50 mph |
26 | |||
27 | Reset Front Wing angle, set RW angle to test setting 1 (taylor needs to elaborate on this) | ||
28 | 14 | Rear Wing Steup test 1 | Speeds 30,40,50 mph |
29 | Change to setting 2 | ||
30 | 15 | Rear Wing Steup test 2 | Speeds 30,40,50 mph |
31 | Change to setting 3 | ||
32 | 16 | Rear Wing Steup test 3 | Speeds 30,40,50 mph |
33 | Change RW to setting 4 | ||
34 | 17 | Rear Wing Steup test 4 | Speeds 30,40,50 mph |
35 | Change RW to setting 5 | ||
36 | 18 | Rear Wing Steup test 5 | Speeds 30,40,50 mph |
37 | Change RW to setting 6 | ||
38 | 19 | Rear Wing Steup test 6 | Speeds 30,40,50 mph |
39 | Change RW to setting 7 | ||
40 | 20 | Rear Wing Steup test 7 | Speeds 30,40,50 mph |
41 | Change RW to setting 8 | ||
42 | 21 | Rear Wing Steup test 8 | Speeds 30,40,50 mph |
43 | Change RW to acceleration setting | ||
44 | 22 | Rear Wing DRS | Speeds 30,40,50 mph |
45 | |||
46 | Add RW endplate extension, reset wing to original configuration | ||
47 | 23 | RW Endplate Extension w Gurney | Speeds 30,40,50 mph |
48 | |||
49 | Remove endplate extensions, start flow vizualization (car should be in baseline config) | ||
50 | 24 | Undertray and Rear Wing Flow Visualization | Speed 35 |
51 | |||
52 | Install Bargeboard | ||
53 | 25 | Bargeboard | Speed 35 |
54 | Remove sidepod and bargeboard | ||
55 | 26 | Without Sidepod | Speed 35 |
56 | |||
57 | Add sidepod without bargeboard, add turning vane without gurney | ||
58 | 27 | Turning vane setting 1 | Speed 35 |
59 | Change turning vane configuration to setting 2 | ||
60 | 28 | Turning vane setting 2 | Speed 35 |
61 | Change turning vane configuration to setting 3 | ||
62 | 29 | Turning vane setting 3 | Speed 35 |
63 | Switch turning vane to best performance setting. Add gurney | ||
64 | 31 | Turning vane with gurney | Speed 35 |
65 | |||
66 | Configure car as appropriate and play around with flow viz! | ||
67 | 32 | Rest of the car visualization | Speed 35 |
68 | |||
69 | Remove Front Wing | ||
70 | 33 | Front wing removal | |
71 | Remove Undertray | ||
72 | 34 | Undetray removal |